95% Alumina Ceramic Fixing Parts / Porcelain Elements

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of 95% Alumina Ceramic Fixing Parts / Porcelain Elements

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of 95% Alumina Ceramic Fixing Parts / Porcelain Elements

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
ai-crucible-11-1773628528988
95% Alumina Ceramic Fixing Parts / Porcelain Elements

Specifications of 95% Alumina Ceramic Fixing Parts / Porcelain Elements

95% Alumina Porcelain Mending Components/ Porcelain Components– Technical Specs

Product Structure

These components are made from 95% high-purity alumina ceramic . The staying 5% includes ingredients that enhance sintering and mechanical toughness. This make-up offers the product exceptional solidity, wear resistance, and electric insulation.

Physical Residences

The density of the ceramic is 3.6– 3.7 g/cm FIVE . Its solidity reaches 1500– 1700 HV on the Vickers scale. The flexural toughness is commonly 300– 350 MPa , while compressive stamina surpasses 2000 MPa . These worths make sure reputable efficiency under hefty mechanical tons.

Thermal Efficiency

These elements deal with heats well. They can operate continuously at up to 1600 ° C in air. The thermal growth coefficient is 6.5– 7.5 × 10 ⁻⁶/ ° C (20– 800 ° C) . Thermal conductivity has to do with 20– 25 W/m · K , which aids take care of warmth flow popular settings.

Electrical Features

Quantity resistivity is more than 10 ¹⁴ Ω · cm at area temperature level. Dielectric toughness stands at 10– 15 kV/mm . The dielectric constant is approximately 9.5– 10.0 at 1 MHz. These functions make the components suitable for electrical insulation in high-voltage or high-frequency applications.

Chemical Resistance

95% alumina ceramic withstands most acids, alkalis, and solvents. It reveals excellent corrosion resistance also in rough chemical settings. Nonetheless, it may respond with hydrofluoric acid or strong antacid at raised temperature levels.

Dimensional Resistance & Surface Area Finish

Criterion dimensional resistance is ± 0.1 mm , yet tighter resistances are offered upon demand. Surface roughness generally varies from Ra 0.4 to Ra 1.6 μm , relying on completing method. Customized forms, holes, and threads can be generated to satisfy specific style needs.

Typical Applications

These ceramic components are extensively used in semiconductor equipment, furnace fixtures, insulators, pump seals, and wear-resistant parts. Their combination of strength, security, and purity makes them ideal for precision commercial systems.

ceramic crucible (22)
95% Alumina Ceramic Fixing Parts / Porcelain Elements

Applications of 95% Alumina Ceramic Fixing Parts / Porcelain Elements

Applications of 95% Alumina Ceramic Mending Parts

Why Pick 95% Alumina Ceramic?

95% alumina ceramic taking care of components offer strong efficiency in tough conditions. They withstand high temperatures, wear, and rust much better than numerous steels or plastics. These parts maintain their form and toughness also when subjected to warm, chemicals, or heavy usage.

Common Makes Use Of in Industry

In the electronics industry, these ceramic components hold components in position inside vacuum cleaner tubes, sensors, and insulators. Their electrical insulation is dependable and secure gradually. They do not perform electrical energy, which makes them safe for high-voltage applications.

The equipment and automation field uses them as guides, spacers, and assistance pieces. Because they are difficult and smooth, they reduce friction and last longer than steel alternatives in relocating systems. This helps machines run more efficiently and need less maintenance.

In chemical handling plants, 95% alumina porcelains take care of aggressive acids and bases without damaging down. They are used in pumps, valves, and nozzles where various other materials would promptly wear out or fall short.

Medical and Research Laboratory Tools

Hospitals and laboratories depend upon these ceramics for precision tools and fixtures. They can be sterilized continuously without damages. Their surface area remains tidy and non-reactive, which is necessary for medical security and accurate test results.

Aerospace and Protection

These parts likewise offer in aerospace systems. They function well in severe settings– like high elevations or rapid temperature level changes– without shedding feature. Radar systems, rocket support devices, and satellite equipment frequently consist of alumina ceramic mendings for security and reliability.

Overall, 95% alumina ceramic repairing components fix real-world issues where resilience, pureness, and efficiency issue many. Engineers select them when typical products fall short.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ceramic crucible (7)
95% Alumina Ceramic Fixing Parts / Porcelain Elements

5 FAQs of 95% Alumina Ceramic Fixing Parts / Porcelain Elements

Frequently Asked Questions About 95% Alumina Ceramic Fixing Parts

What are 95% alumina ceramic fixing parts used for?

These parts hold or support components in high-temperature, corrosive, or electrically sensitive environments. You’ll find them in furnaces, semiconductor equipment, and electrical insulators. Their strong structure and heat resistance make them ideal where metal or plastic would fail.

Why choose 95% alumina over other ceramics?

95% alumina offers the best balance of strength, insulation, and cost. It resists wear, handles temperatures up to 1600°C, and blocks electricity well. Higher purity ceramics cost more but offer little extra benefit for most industrial uses.

Are these parts fragile?

Ceramic is harder than steel but can crack under sudden impact. Handle with care during installation. Once mounted properly, they perform reliably under steady loads and thermal cycles. Avoid bending forces or sharp blows.

Can you customize the shape or size?

Yes. We make custom pins, spacers, brackets, and insulators based on your drawings. Tolerances as tight as ±0.05 mm are possible. Just share your specs, and we’ll match your design needs.

How do I install these ceramic elements?

Use soft jaws or non-marring tools to avoid chipping. Do not overtighten—ceramic does not flex like metal. Match thermal expansion rates of nearby materials to prevent stress cracks during heating or cooling. Always follow recommended torque values if using threaded inserts.

REQUEST A QUOTE

REQUEST A QUOTE