Round 96%/99.6% Alumina (Al2O3) Ceramic Substrate Wafer

PRODUCT PARAMETERS

Description
REQUEST A QUOTE

Description

Overview of Round 96%/99.6% Alumina (Al2O3) Ceramic Substrate Wafer

Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.

Features of Round 96%/99.6% Alumina (Al2O3) Ceramic Substrate Wafer

  • High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
  • Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
  • Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
  • High Compressive Strength: Capable of withstanding significant mechanical loads.
  • Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
  • Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.
ai-how-20-1774509013459
Round 96%/99.6% Alumina (Al2O3) Ceramic Substrate Wafer

Specifications of Round 96%/99.6% Alumina (Al2O3) Ceramic Substrate Wafer

Round Alumina Ceramic Substratum Wafer– Technical Specifications

Material Structure

This round ceramic wafer is made from high-purity alumina (Al2O3). 2 pureness degrees are offered: 96% alumina and 99.6% alumina. The greater the purity, the much better the electric insulation and thermal conductivity. Both grades supply solid mechanical stability and outstanding resistance to wear and deterioration.

Physical Measurements

The wafer comes in conventional round forms. Typical diameters vary from 25 mm to 100 mm. Thickness options include 0.25 mm, 0.5 mm, 0.635 mm, 1.0 mm, and customized sizes upon demand. Tolerances are limited: size ± 0.1 mm, thickness ± 0.05 mm. Sides are smooth and without chips or splits.

Secret Residences

96% alumina supplies excellent mechanical stamina at a reduced expense. It matches general-purpose applications like sensor bases and insulating spacers. 99.6% alumina provides premium performance in demanding atmospheres. It has higher thermal conductivity (around 30 W/m · K) and far better dielectric toughness. This makes it excellent for high-frequency circuits, power electronic devices, and semiconductor product packaging.

Surface area Finish

Both sides of the wafer are brightened to a great surface area finish. Common roughness (Ra) is less than 0.2 µm. This makes certain reliable bonding with thin-film or thick-film metallization processes. Surfaces are tidy, flat, and ready for further handling such as display printing or sputtering.

Thermal and Electric Performance

These substrates manage running temperature levels approximately 1600 ° C in air. They maintain stable electrical insulation even under high voltage. Volume resistivity exceeds 1014 Ω · cm. Dielectric consistent is about 9.8 at 1 MHz for 96% grade and 9.9 for 99.6% grade. Loss tangent stays low, sustaining efficient signal transmission.

ceramic crucible (33)
Round 96%/99.6% Alumina (Al2O3) Ceramic Substrate Wafer

Applications of Round 96%/99.6% Alumina (Al2O3) Ceramic Substrate Wafer

Applications of High-Purity Alumina Ceramic Substrate Wafers

Why Purity Matters

96% and 99.6% alumina (Al ₂ O FOUR) ceramic wafers are counted on demanding sectors because of their high pureness. The greater the alumina content, the much better the performance. These substrates offer strong electrical insulation, outstanding thermal conductivity, and excellent mechanical strength. They also withstand wear, rust, and heats.

Electronic devices and Semiconductors

In electronics, these wafers function as steady platforms for circuits and sensing units. Their reduced signal loss and consistent dielectric residential or commercial properties make them suitable for hybrid circuits, chip packaging, and RF components. The 99.6% quality is commonly selected when tighter tolerances and cleaner surfaces are needed.

Medical Instruments

Clinical tools require materials that are safe, clean, and trustworthy. Alumina ceramic wafers fulfill those demands. They are made use of in implantable tools, diagnostic devices, and medical instruments. Their biocompatibility and resistance to sterilization processes include additional value in healthcare settings.

Aerospace and Protection

Severe conditions require reliable materials. In aerospace and defense systems, these substrates manage rapid temperature level adjustments and severe atmospheres. They sustain radar systems, assistance modules, and interaction equipment where failing is not an option.

Industrial Sensors and Automation

Factories make use of sensors to check pressure, temperature, and flow. Alumina wafers offer the foundation for these sensing units. They remain stable under continuous procedure and withstand chemical exposure from oils, coolants, and cleansing agents.

Lights and Optics

High-intensity illumination– like LED and laser systems– depends on alumina substratums for heat management and architectural support. The product’s reflectivity and thermal stability assistance preserve brightness and extend gadget life.


Company Profile

Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.


Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.


Payment Methods

T/T, Western Union, Paypal, Credit Card etc.

Shipment Methods

By air, by sea, by express, as customers request.

ceramic crucible (4)
Round 96%/99.6% Alumina (Al2O3) Ceramic Substrate Wafer

5 FAQs of Round 96%/99.6% Alumina (Al2O3) Ceramic Substrate Wafer

Frequently Asked Questions About 96%/99.6% Alumina Ceramic Substrate Wafers

What is a 96% or 99.6% alumina ceramic substrate wafer?

It is a flat, circular piece made from aluminum oxide (Al₂O₃). The number shows how pure the material is—96% means it has 96% alumina and 4% other materials, while 99.6% is almost pure alumina. These wafers are strong, resist heat well, and do not conduct electricity.

Why choose 99.6% over 96% alumina?

99.6% alumina has better electrical insulation and higher thermal conductivity. It also handles higher temperatures without breaking. Use 99.6% when performance matters most. Choose 96% for general uses where cost is a bigger concern.

Where are these wafers used?

They are common in electronics, sensors, and semiconductor packaging. You will find them in power modules, LED bases, and high-frequency circuits. Their stability and durability make them ideal for harsh environments.

Can these wafers be customized?

Yes. They can be made in different sizes, thicknesses, and shapes. Holes, grooves, or surface finishes can also be added based on your needs. Just share your design, and we can produce it.

How should I handle and store these wafers?

Handle them with clean gloves to avoid oils or dirt. Store them in a dry, dust-free place. Keep them flat to prevent cracking. Avoid sudden temperature changes during use or storage.

REQUEST A QUOTE

REQUEST A QUOTE