Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Thermal Resistant 96%/99.6% Alumina (Al2O3) Ceramic Substrate Plate
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of Thermal Resistant 96%/99.6% Alumina (Al2O3) Ceramic Substrate Plate
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of Thermal Resistant 96%/99.6% Alumina (Al2O3) Ceramic Substrate Plate
Thermal Immune Alumina Porcelain Substratum Plate
Material Purity
96% and 99.6% Al two O four options available. These high-purity alumina plates provide outstanding electrical insulation and strong mechanical efficiency. The 99.6% grade supplies superior thermal conductivity and tighter dimensional control, while the 96% grade equilibriums expense and performance for basic industrial usage.
Trick Characteristics
These substrates hold up against continuous operating temperature levels approximately 1600 ° C (2912 ° F). They stand up to thermal shock, chemical deterioration, and use. Their low thermal growth makes certain stability during fast home heating or cooling cycles. Electric resistivity stays high also at elevated temperatures, making them optimal for demanding electronic and power applications.
Physical Qualities
Typical density arrays from 0.25 mm to 6.0 mm. Requirement plate dimensions consist of 50 × 50 mm, 100 × 100 mm, and custom-made dimensions upon request. Surface area surface is smooth, with resistances held to ± 0.05 mm on important dimensions. Both sides can be brightened or left as-sintered based on application needs.
Typical Applications
Used in power electronics, semiconductor production, sensors, and high-temperature heaters. They serve as shielding bases for thick-film circuits, LED plans, and hybrid modules. Their dependability in rough atmospheres makes them a trusted selection in aerospace, automotive, and industrial equipment.
Handling Abilities
Plates can be laser-cut, pierced, metallized, or screen-printed to meet specific style demands. Metallization alternatives consist of tungsten-manganese, silver, or gold layers for straight bonding to electronic components. Custom-made shapes and features are sustained with accuracy machining.

Applications of Thermal Resistant 96%/99.6% Alumina (Al2O3) Ceramic Substrate Plate
Applications of Thermal Resistant 96%/ 99.6% Alumina (Al Two O ₃) Ceramic Substrate Plates
High-Temperature Electronic devices
Thermal immune alumina ceramic substratum plates are extensively utilized in digital systems that need to function under high warm. Their strong capability to take care of temperatures up to 1700 ° C makes them perfect for power components, sensors, and ignition systems. These parts remain stable also when other materials would certainly stop working.
Industrial Home Heating Tools
In heating systems, kilns, and heating elements, 96% and 99.6% pureness alumina layers function as insulators and support frameworks. They withstand thermal shock and keep their shape over extended periods. This assists industrial equipments run safely and last longer.
Semiconductor Manufacturing
The semiconductor sector requires tidy, trusted parts. Alumina substratums fulfill these needs because they do not launch pollutants when heated. They are used in wafer handling devices, plasma chambers, and inspection devices where accuracy and heat resistance issue.
Aerospace and Protection Solutions
Aircraft and defense electronic devices deal with extreme problems. Alumina ceramic plates safeguard sensitive circuits from warm and vibration. Their electric insulation and mechanical toughness make them a trusted option in radar systems, assistance units, and onboard power controls.
Medical Devices
Some medical devices have to be sanitized at high temperatures. Alumina substrates can experience duplicated sterilization without damage. They are located in imaging gadgets, surgical instruments, and diagnostic tools that call for both cleanliness and durability.
Automotive Sensors and Ignition Components
Modern cars use several sensing units near hot engine parts. Alumina ceramic plates provide a secure base for oxygen sensing units, ignition system insulators, and exhaust monitoring systems. They assist cars and trucks run cleaner and much more efficiently by remaining trusted under consistent heat anxiety.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Thermal Resistant 96%/99.6% Alumina (Al2O3) Ceramic Substrate Plate
Frequently Asked Questions About Thermal Resistant Alumina Ceramic Substrate Plates
What is a 96%/99.6% alumina ceramic substrate plate?
This plate is made from high-purity aluminum oxide (Al₂O₃). The numbers 96% and 99.6% show how much pure alumina is in the material. These plates are strong, resist heat well, and do not conduct electricity. They are used in electronics, sensors, and high-temperature environments.
Why choose 99.6% over 96% alumina?
99.6% alumina has higher purity. It offers better thermal conductivity, stronger mechanical strength, and improved electrical insulation. Use 99.6% when performance under extreme heat or voltage is critical. Choose 96% for cost-sensitive applications where slightly lower performance is acceptable.
How does it handle high temperatures?
Both grades resist very high temperatures without deforming or breaking down. 99.6% alumina can work continuously at up to 1700°C. 96% alumina performs well up to about 1600°C. This makes them ideal for furnaces, heaters, and aerospace parts.
Is it safe for electronic applications?
Yes. Alumina ceramic is an excellent electrical insulator. It keeps circuits separated and stable even under high voltage or fast temperature changes. Its low signal loss also supports high-frequency performance in RF and microwave devices.
Can these plates be customized?
Yes. Manufacturers can cut, drill, and shape the plates to fit your design. Common customizations include specific thicknesses, hole patterns, and surface finishes. Just share your drawing or specs, and they will produce parts that match your needs exactly.
REQUEST A QUOTE
RELATED PRODUCTS
Petroleum Chemical Fillers: Alumina Microspheres
Laser Drilled Alumina (Al2O3) Ceramic PCB Substrate
Innovacera 96% Alumina Ceramic Flat Bar
Low Maintenance Alumina Ceramic Pump Parts & Rods
High Precision Alumina Ceramic Refractory Tube / Shaft for Boiler Pumps


