Next-Generation Ceramics: Unlocking Superior Properties for Industry
PRODUCT PARAMETERS
Description
Overview of Tape Cast Pink 94.4% Al2O3 Alumina Ceramic PCB Substrate
Alumina Ceramic, or Aluminum Oxide (Al₂O₃), is the most widely used and versatile advanced ceramic material. Known for its excellent balance of mechanical, thermal, and electrical properties, it is a cost-effective solution for a vast array of demanding industrial applications. Alumina components are produced in purity levels ranging from 85% to 99.9%, with properties enhancing as purity increases.
Features of Tape Cast Pink 94.4% Al2O3 Alumina Ceramic PCB Substrate
- High Hardness & Wear Resistance: Offers exceptional resistance to abrasion and mechanical wear.
- Excellent Electrical Insulation: Maintains high electrical resistivity even at elevated temperatures.
- Good Thermal Conductivity: (For a ceramic) effectively dissipates heat, especially in higher purity grades.
- High Compressive Strength: Capable of withstanding significant mechanical loads.
- Chemical Inertness: Highly resistant to corrosion from acids, alkalis, and molten metals.
- Cost-Effectiveness: Provides superior performance at a lower cost compared to many other technical ceramics.

Specifications of Tape Cast Pink 94.4% Al2O3 Alumina Ceramic PCB Substrate
Requirements of Tape Cast Pink 94.4% Al Two O Two Alumina Ceramic PCB Substratum
Product Make-up
This substrate is made from high-purity alumina ceramic having 94.4% Al ₂ O SIX . The continuing to be portion includes additives that sustain the tape spreading procedure and enhance mechanical toughness. The pink color comes from trace elements included during production and does not influence performance.
Physical Features
The material has a smooth, uniform surface area ideal for thick-film and thin-film circuit printing. Its thickness ranges from 3.60 to 3.65 g/cm FIVE , guaranteeing good structural honesty. The normal thickness alternatives are 0.25 mm, 0.38 mm, 0.50 mm, 0.635 mm, and 1.0 mm , however custom sizes are available upon demand. Edges are clean-cut with very little breaking.
Thermal and Electrical Efficiency
This alumina substrate uses solid thermal conductivity of about 20– 24 W/m · K , which helps take care of warm in power electronics. It maintains steady electrical insulation even at high temperatures. The dielectric constant is approximately 9.6 at 1 MHz , and the dissipation aspect stays below 0.001 , making it appropriate for high-frequency applications.
Mechanical Stamina
The flexural toughness averages 300– 350 MPa , giving dependable assistance for component mounting and handling throughout assembly. Firmness actions around 1500– 1600 HV , providing good resistance to put on and scraping.
Applications
Engineers use this pink alumina substratum in crossbreed circuits, LED components, sensors, automotive electronic devices, and RF devices. Its balance of price, efficiency, and manufacturability makes it a preferred choice for commercial and customer electronics where reliability issues.
Handling Compatibility
The substrate works well with common thick-film pastes, laser cutting, and soldering procedures. It can additionally be metalized making use of display printing or thin-film deposition techniques for producing conductive traces.

Applications of Tape Cast Pink 94.4% Al2O3 Alumina Ceramic PCB Substrate
Applications of Tape Cast Pink 94.4% Al ₂ O Four Alumina Ceramic PCB Substratum
High-Performance Electronics
The tape cast pink 94.4% Al ₂ O two alumina ceramic PCB substrate is extensively utilized in high-performance electronic systems. It supplies strong electric insulation and excellent thermal conductivity. These residential properties make it suitable for power modules, RF tools, and LED illumination systems. Designers pick this product when integrity under heats or extreme conditions is needed.
Aerospace and Protection Systems
In aerospace and defense applications, security and resilience matter a lot of. This alumina substrate keeps performance throughout extreme temperature level swings and high vibration environments. It sustains radar systems, avionics, and interaction equipment where constant signal stability is essential. Its mechanical strength ensures long service life even in demanding goals.
Industrial Sensors and Automation
Industrial automation counts on sensing units that operate constantly in hard settings. The pink alumina substratum takes care of exposure to warmth, wetness, and chemicals without degrading. It is frequently discovered in pressure sensors, gas detectors, and electric motor control devices. Its steady dielectric residential or commercial properties assist preserve precise analyses in time.
Medical Gadgets
Clinical electronics require materials that are both biocompatible and electrically reputable. This 94.4% alumina ceramic meets those needs. It shows up in diagnostic devices, imaging systems, and implantable gadget real estates. The substrate’s smooth surface and purity minimize the risk of contamination during manufacturing and use.
Crossbreed and Thick-Film Circuits
Manufacturers utilize this substrate for hybrid incorporated circuits and thick-film printing. Its flatness and uniform density permit specific deposition of conductive pastes. The pink color likewise aids with aesthetic evaluation throughout manufacturing, boosting quality assurance. This makes it a functional selection for custom-made circuit styles needing limited tolerances.
Company Profile
Synthetic-chemical focus on the research and development, production and sales of ceramic products, serving the electronics, ceramics, chemical and other industries. Since its establishment in 2015, the company has been committed to providing customers with the best products and services, and has become a leader in the industry through continuous technological innovation and strict quality management.
Our products includes but not limited to Aluminum Nitride, Aluminum Oxide, Boron Carbide, Boron Nitride, Ceramic Crucible, ect. If you are interested in any type of these, please feel free to contact us.

Payment Methods
T/T, Western Union, Paypal, Credit Card etc.
Shipment Methods
By air, by sea, by express, as customers request.

5 FAQs of Tape Cast Pink 94.4% Al2O3 Alumina Ceramic PCB Substrate
Frequently Asked Questions: Tape Cast Pink 94.4% Al₂O₃ Alumina Ceramic PCB Substrate
What is this substrate made of?
This substrate uses 94.4% pure alumina (Al₂O₃). It is formed using the tape casting method. The pink color comes from small amounts of additives that help with processing. These additives do not affect performance.
Why choose pink alumina over other types?
Pink alumina offers a good balance of cost and performance. It has strong mechanical strength and good electrical insulation. It also handles heat well. This makes it ideal for power electronics, sensors, and LED applications. It is less expensive than 96% or 99.6% alumina but still reliable.
What are the typical thicknesses available?
Standard thickness options range from 0.25 mm to 1.0 mm. Custom thicknesses can be made upon request. Thinner substrates work well for compact designs. Thicker ones offer better mechanical support and heat spreading.
Can this substrate be used in high-temperature environments?
Yes. This material stays stable up to 1500°C. It resists thermal shock and keeps its shape under repeated heating and cooling. That makes it suitable for automotive, aerospace, and industrial systems where temperature changes are common.
Is it compatible with standard PCB manufacturing processes?
Yes. The substrate works with thick-film and thin-film metallization. You can use screen printing, laser trimming, and soldering just like with regular PCBs. Its smooth surface ensures good adhesion for conductive pastes and fine circuit patterns. Always follow recommended firing and handling guidelines to avoid damage.
REQUEST A QUOTE
RELATED PRODUCTS
95% Alumina Ceramic Insulating Block with Holes
99.99% Purity Alumina Ceramic Sputtering Target – Custom Sizes
Whole Alumina Ceramic Rod / Shaft for Electroplating
Zirconia-Gravel Crafted Alumina Ceramic Basket Gemstone
Porous 95% Al2O3 Fine Ceramic Insulator Board / Plate


